Non-pressure Solar Water Heater
Product Description
Non-pressure solar water heater uses all-glass evacuated tubes as the solar collector for absorbing solar energy and transferring it into heat energy. As the different densities of hot water and cold water, the hot water flows automatically upwards while the cold water flows down. The water flowing cycle is created in the tube. And the water in the storage tank is heated from this nature circulation. The hot water pressure of this non-pressure system is from the gravity, so it should be installed on the roof or at least 3-4 meters higher than hot water tap. Or you can install a booster pump to get stronger outlet hot water.
Pictures of Non-pressure Solar Water Heater
Description Of Non-pressure Solar Water Heater
Specifications:
Inner tank | Φ360mm/Φ380mm; SUS304-2B; 0.4mm |
Outer tank | Φ460mm/Φ480mm/Φ500mm; Galvanized steel; 0.35mm |
Vacuum tube | 58*1800mm; 1.6mm thickness; ALN/ALN-SS/CU coating |
frame | Galvanized steel, 1.45mmthickness |
Air vent connection | 3/4 inch |
Electrical heater connection | 1 or 1.25 inch |
Sensor connection | 1/2 inch |
Magnesium bar connection | 3/4 inch |
Water connection | 1/2 or 3/4 inch |
Capacity | 80-360L |
Pressure | 0 MPa |
Insulation | 50mm/60mm of high density polyurethane foam |
Hail resistance | 30mm |
Guaranty | Full system for 5 years, tube for 15 years |
All the systems are available for customization |
Details Of Non-pressure Solar Water Heater
Parts of Non-pressure Solar Water Heater
Price & Terms
Price term | FOB Shanghai/Ningbo |
Payment | 30% T/T as deposit before production & 70% at sight of the scan of B/L |
100% T/T payment for sample (<5 units) before production |
Delivery | 3-4 full containers each week at sight of deposit |
Extra charge USD50.00 for sample with each extra wooden box for full protection in transportation |
Sample price will be added extra payment 25% on the basis of wholesale price |
Factory Display
Exhibition
Contact Us